SparksLab puts your electrical drawings on your phone. Map every socket, light and switch, draw each circuit back to its board, and hand the client circuit schedules and an O&M pack that match what you installed. Built for commercial and domestic work alike.
SparksLab is being tried on real jobs now. Leave your details and we’ll let you know when it’s ready.
Sockets, spurs, cooker and shower outlets, EV chargers, downlights, battens, switches, PIRs, emergency lights and smoke alarms, each with its own symbol.
Consumer units, distribution boards and sub-boards, with their make and model, number of ways and what feeds them.
Give the first point its board, circuit, protective device, cable and RCD. Every next point carries them on until you change circuit.
Draw each circuit through its points back to the board. Every circuit gets its own colour, and lengths come from the drawing scale.
Show only power, lighting, controls, containment or fire and safety, so a busy domestic drawing stays readable.
Mark each point Not started, 1st fixed, 2nd fixed or Tested, and raise a blocker with a reason when something stops you.
Everything you record on site becomes the paperwork, with your logo and company details on every page.
One table per board: way, description, protective device, cable, RCD, number of points, length and progress, built from the drawing so it can’t drift.
Boards, circuit schedules, as-fitted drawings, the device schedule, completion records and a certificate register for your EIC, Minor Works and EICR.
Bring in a points schedule from a spreadsheet. “2G SSO”, “32A B” and “2.5 T+E” are understood, then tap each point into place.
A house with one consumer unit, or an office with a dozen boards over five floors: SparksLab works the same way.
Leave your details and we’ll get in touch when it launches.
